In this modern time, when science is running in front of us and it’s leaving everything behind, it’s coming up with new innovations and discoveries to make our life easier and to reduce our work stress as well as time.
A pull-out faucet is one of those as it’s highly versatile and works in many different ways. You can wash every corner of your sink and dishes with a pull-out spray as the spout comes down when you pull it and it helps you to reach every corner.
There’s a hose attached to the faucet spout and this hose is super flexible so that it can move comfortably. When you’re using a pull-down faucet or a pull-out faucet, you can face many common problems. Technical issues are going to appear over time and you need solutions to them.
In this article, we’re going to discuss about most common pull-out spray kitchen faucet problems and how you can fix them easily. So, let’s jump in!
Low water flow
When it feels like low water flow, there’s must be something wrong with your faucet aerator. The difference between a regular faucet and a pull out spray faucet is the aerator. It keeps a little space inside it. When the water flow is low, it’s a sign of a mineral deposit inside the aerator.
You can easily clean it with a stick or a regular brush. You don’t have to add any solutions as the deposit isn’t pretty much hard to clean.
The hose not retracting or docking properly
There are two methods for hose retracting. Most of the manufacturers provide a weight to add at the bottom of the sink. This weight pulls your faucet hose towards it and it stays docked. When you feel like your faucet hose isn’t retracting properly, you need to check that weight if it’s there or not. Sometimes, it falls down and then your faucet hose doesn’t retract.
Another simple cause can be the magnet. Many of the faucets come up with a magnetic docking system. It keeps a magnet at the faucet head and the spout or the sprayer has another part. When you finish working with it, you simply put your faucet back and the magnet pulls it up. When it’s not docking properly, there’s something wrong with the magnet and you need to change it.
Pull out hose is leaking
This problem is most common if you’re using a pull-out spray faucet. What happens to this kind of faucets is when you’re pulling your faucet several times a day, it goes through a friction process and it makes the adjustment joint weak. The adjustment is under the sink where other water line joints are. This hose is attached to a nut that holds the hose tight.
If this happens, you need to change the hose as it comes up with a built-in nut attached to it. Many people change the whole faucet, you don’t have to do that. Just buy another affordable hose. There are plenty of hoses available on the market.
To change the hose, first of all, turn of the water supply and turn the faucet on to drain all the water remaining in the hose. Then go down under the sink and find out where the pull-down sprayer hose is attached.
You can easily remove the nut and pull your hose from the spout. You can see there’s a black colored weight added in that hose. When the hose is removed totally, you can pull the weight down easily. Now, it’s time to add the new hose. First, insert it through the spout and pull it down to the sink bottom. Before attaching the nut, don’t forget to add the weight.
Sticky faucet handle or lever
When you feel like your faucet handle is sticky and you’re not able to move it properly, there are chances that your faucet handle is clogged or jammed with debris or rust. This can go away with a proper cleanup.
When you didn’t use your faucet for a couple of months, there are possibilities of rust and corrosion for some special sort of metal levers. In that case, you need to detach the lever or handle and repair it with penetrating oil or rust remover. That process is easy as well.
Leaky spray head
When the spray head is leaky there are several things you can do. It happens when you rotate your faucet spray unevenly and you don’t retract it properly. Besides, using a high-speed water source can make this as well.
You can change the spray head comfortably and you don’t have to change the whole faucet in this process too! Just buy a new one from the market that fits with your faucet and that goes according to your kitchen decoration.
Now, turn off the water supply valves from under the sink. Drain water left inside the hoses. Now remove the nut that’s attaching the spray head with the hose. This will require a simple wrench and a screwdriver. Then remove the C clip you can find inside the spray head.
After the removal part is completed, attach the new one to your hose. Just give the C clip an attachment and set the spray head at its place. Then tighten the nut with the wrench. This will eliminate the leaky spray head problem.
Conclusion
So, these are the most common problems you face when you’re using a pull-out spray. In this article, we’ve tried to cover the most common pull out kitchen spray faucet problems and solutions to them. If you’re a pull-out faucet sprayer and you’re struggling with these issues, you can go through these steps to make your fixing easier.
To read more articles like this one, visit our website. If you have any questions regarding this topic, feel free to leave a comment here or contact us directly.