Using a touch activated kitchen faucet gives you convenience. With these faucets, you can turn the water flow on whenever you want with just one touch. There are no chances to spread out the mess from your hand.
Now, there are many things that can happen due to technical difficulties and faults. In these cases, you may need to reset or troubleshoot your faucet to eliminate your problems. Resetting the faucet or troubleshooting is an easy task to deal with but you can’t do it until you know the exact process. Besides, any wrong movements of you can make the problem increased.
In this article, we’ll be discussing how to do a reset on a delta essa touch 20 kitchen faucet, in which situation, you need to do what. We’ll be discussing every process step by step so you won’t have any doubt left in your mind.
So, let’s begin!
You may choose a new delta essa touch20 faucet in below.
Things that can happen
- The LED indicator isn’t working properly
- The water flow is pretty low
- You’re feeling ghost activities like automatic turn on or off
- The faucet is not sensitive and not working smoothly with a touch
- Faucet not responding at all
- Water dripping issues under the sink
Solutions to the problems
The LED indicator isn’t working properly
The LED indicator is the most important component of your faucet. It shows you if the faucet is dead or alive. Besides, it indicates the water is cold or hot. If the LED indicator isn’t working properly, the first thing you need to do is battery or power source check-up. To do this,
Try locating the battery case under the sink and check all the batteries. If your batteries are dead, remove the old batteries and replace them with new ones. Some models have a red light on the battery compartment which pops up when the batteries are running low.
Open the battery case and fill the case with new batteries. Check the alignment of the batteries according to the negative and positive poles. After that, close the battery case and make sure it locks up properly and in a secure way before you continue to your next step.
After you change the batteries and put them according to the alignment, you need to locate the reset button. It can be found on the battery compartment or near it.
Push the reset button to reset your kitchen faucet functions. After that, test the faucet and the LED light that it’s working properly.
It’s essential to note that every faucet doesn’t have the reset button. In that case, you just need to change the batteries and put them together according to the layout and positive, negative poles.
If your LED isn’t working yet, maybe there’s something wrong with the LED indicator itself. You need to replace the LED in this case.
The water flow is pretty low
If you feel the water flow is pretty low, you need to check the internal components of the faucet. It can happen from many issues.
In this case, what you need to do is go through the whole faucet along with the supply lines. Make sure the valves in the cold and hot water supply is working properly. Besides, don’t forget to check the outlet which is connected to the solenoid. Check the water flow by disconnecting the solenoid and connecting the outlets with each other.
You’re feeling ghost activities like automatic turn on or off
When you notice that your faucet is turning on and off all by itself, you need to check the wires as soon as possible. This happens when you got pinched wires. Check those wires out and make sure they’re not touching each other or there are no leaks in the wires.
Besides, don’t forget to check the faucet shank. Make sure your faucet shank is not touching your sink. Check the C clip connected with wires. Make sure it’s attached there properly and doing its work.
The faucet is not sensitive and not working smoothly with a touch
Faucet not responding at all
If your faucet is not responding at all with your touch, maybe there are problems with the c clip. In this situation, you have to make sure that the C clip is attached there safely and it’s working properly. If you feel that your faucet is not working yet, you need to replace the C clip and try attaching a new one.
Water dripping issues under the sink
If you’re having water dripping issue, you need to check the supply lines and the solenoid. You need to gently check the joints you made while you were installing the faucet. The cold and hot water supply lines and valves.
After that, you need to check the solenoid and the ports. If the water is dripping from there, leave it. You need to contact the manufacturer. You can’t open the solenoid and if you do, you’ll do it at your own risk because you’re going to have warranty issues then.
Conclusion
So, this is how to do a reset on a delta essa touch 20 kitchen faucet. If you’re having these troubles, go through these steps and we hope your problems will be solved.
The good news is, Delta gives great support. When you’re having a problem, just give them a call and they’ll tell you what to do. If the problem is extreme, call them up, they’ll give you a home repair service as soon as they can.
Faucet is turning on and off by itself. Changed batteries and still happening.